Side Shaft Geared DC Motors 200 RPM
200 RPM Side Shaft 37mm Diameter Compact DC Gear Motor is suitable for small robots / automation systems. It has sturdy construction with gear box built to handle stall torque produced by the motor. Drive shaft is supported from both sides with metal bushes. Motor runs smoothly from 4V to 12V and gives 200 RPM at 12V. Motor has 6mm diameter, 22mm length drive shaft with D shape for excellent coupling.
Table below gives fairly good idea of the motor’s performance in terms of RPM vs voltage at no load and that of stall torque at different voltages.
Important Note: This motor will be bit noisy while running. For long life, this motor is not recommended for application requiring dynamic torque of more than 3 kg-cm.
- RPM: 200 at 12V
- Voltage: 4V to 12V
- Stall torque: 4.4Kg-cm at stall current of 1.3Amp.
- Shaft diameter: 6mm
- Shaft length: 22mm
- Gear assembly: Spur
- Brush type: Carbon
- Motor weight: 143gms
- Dimension: Refer to diagram below
Note: This is representative torque. Actual torque may vary by ±20%